|Sr.||Title of Research Paper/Article||Author||e-Certificate||Download|
|1||Retrofitting of Existing RCC Buildings by Method of Jacketing Abstract – Many parts of the country have suffered earthquake in last three decades. In costal part of South India faced Tsunami. In first three earthquakes it was found that many of damaged structures were build in non-engineered masonry techniques. Unreinforced masonry structures are the most vulnerable during an earthquake. Normally they are designed for vertical loads and since masonry has adequate compressive strength, the structures behave well as long as the loads are vertical. When such a masonry structure is subjected to lateral inertial loads during an earthquake, the walls develop shear and flexural stresses. The strength of masonry under these conditions often depends on the bond between brick and mortar (or stone and mortar), which is quite poor. This bond is also often very poor when lime mortars or mud mortars are used. A masonry wall can also undergo failure in-plane shear, if the inertial forces are in the plane of the wall. Shear failure in the form of diagonal cracks is observed due to this. However, catastrophic collapses take place when the wall experiences out-of-plane flexure. This can bring down a roof and cause more damage. Masonry buildings with light roofs such as tiled roofs are more vulnerable to out-of-plane vibrations since the top edge can undergo large deformations. It is always useful to investigate the behavior of masonry buildings after an earthquake, so as to identify any inadequacies in earthquake resistant design. Studying types of masonry construction, their performance and failure patterns helps in improving the design and detailing aspects. In previous earthquakes many R.C.C buildings have also collapsed and are found unsafe due to faulty workmanship. Many other causes are responsible for major collapse and damage to the R.C.C structures. The review of the codes shows that there were five zones of earth quakes of Indian subcontinents, But its revision is now shoeing four zones of earth quake. Some part of Gujarat lies in zone V which has largest severity of Earthquake. So as the districts that are located on the boundary of Gujarat – Maharashtra like Nasik, Dhule, Nandoorbar lye in zone III of earthquake zone, zone III is second largest zone of earth quake in India. Therefore it seems to be an compulsion to have an review of the old RCC structures (Likely have completed their service period) in and around Nashik for the structural behaviour to avoid future inconvenience.
This project is just a similar attempt. A health building in the heart of Nashik city is being strengthened to overcome the future disorders. From the physical and experimental investigations it was concluded that the building either should be demolished or at least should be retrofitted with suitable technique to increase its service life.
It was then decided to implement RCC column jacketing technique due to its feasibility and ease for execution.
All the columns on both the floors are now suitably jacketed, the loose pockets of concrete that were investigated during the test are reconcreted, the faulty slabs are completely opened and the rusted reinforcement is replaced with new reinforcement as per the design requirement. And the slabs are recasted with M25 grade of ready mix concrete.
|Bhavar Dadasaheb O., Dhake Pravinchandra D. & Ogale Ramesh A.|
|2||On Decomposition of Intuitionistic Fuzzy Continuity Abstract – There are various types of generalizations of intuitionistic fuzzy continuous functions in the development of intuitionistic fuzzy topology. In this paper, we obtain a decomposition of intuitionistic fuzzy continuity in intuitionistic fuzzy topological spaces by using intuitionistic fuzzy w-continuity and intuitionistic fuzzy rw-continuity.||M. Thirumalaiswamy, K. Ramesh & K. M. Arifmohammed|
|3||Design, Fe Analysis & Optimization of Fork Truck Lift of Automated Guided VehicleAbstract – Automated guided vehicles (AGVs) increase efficiency and reduce costs by helping to automate a manufacturing facility or warehouse. AGVs are employed in nearly every industry, including pulp, paper, metals, newspaper, and general manufacturing. Transporting materials such as food, goods etc are also done. Fork truck vehicles operate just like Truck, truck without driver. In this thesis work, the stresses which appear in the lifting installation of a fork-lift truck at loading-unloading operations are investigated for given input data like load carrying capacity of truck, maximum pressure inside the cylinder, pallet dimensions. Firstly calculate the effects of various loads on the parts of the fork truck in terms of stresses and then compare calculated Stresses with material allowable stresses (yield stress/F.O.S).
After Comparison of Allowable Stresses with generated stresses, we perform FE Analysis and Compare theoretical stresses with FE generated Stresses. Once FE Analysis Results, theoretical Results and Allowable material stresses are compared. We conclude that whether there is a chance of Optimization or not?
If there is a chance of Optimization then reduce fork truck weight by changing various parameters and validate that design with the help of FE Tools.
|Shailesh Bhanushali & Vaibhav Limbachiya|
|4||A Review Paper for Optimization of Surface Roughness and MRR in CNC Milling Abstract – The main purpose of this review paper is to check whether quality lies within desired tolerance level which can be accepted by the customers. So, optimizing surface roughness and metal removal rate using various CNC machining parameters including spindle speed (N), feed rate (f) and depth of cut (d) and insert nose radius (r). By developing a mathematical model in CNC milling on a hard steel specimen. And this mathematical model is developed with the help of the design of Matrix. Also CNC (Computer Numerical Control), in which the instructions are stored as a program in a micro-computer attached to the machine. The computer will also handle much of the control logic of the machine, making it more adaptable than earlier hard-wired controllers. This experimental study aims at response surface methodology has been applied for finding the effect on surface roughness and metal removal rate by various process parameters. And after that we can easily find out that which parameter will be more affect.||Hardik B. Patel & Satyam P. Patel|
2018 RAIJMR - All Right Reserved | Design & Development - Beyond Web
Agree for publishing here means…
(1) My/Our research paper is originally written by me/us and all information is true. I/we will fully responsible for this research paper.
(2) There is not use any plagiarised material by using any e-data and not stolen from any hard,soft as well as from any printed material.
(3) I/We assure you that, My/Our paper has not been published anywhere in Past. If My/Our research paper will be published by your academy RAIJMR, then I/We will not publish anywhere in future.
(4) I/We are not breaking any copyright protocol of anyone.
(5) My/Our paper is not a racial or provocative incitement. If there is a complaint in the future regarding this paper, then its full responsibility will be ours.
(6) No responsibility is assumed by RAIJMR and the Publisher of RAIJMR, its staff or members or the editorial board for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products instruction, advertisements or ideas contained in a publication by RAIJMR and by the Publisher of RAIJMR.
Declaration Agreement for ISBN Book Publishing
Declaration Agreement: Agree for ISBN International Book Publishing here means…
1. I/We hereby declare that the Book work is my own original work, carried out throughout by me/us only. And I/We also declare that this entire book work is my/our own work and no part of this book has been published by me/us in any publication unit.
2. It’s restricted for this book to reproduce in any form, by Photostat, microfilm, Xerography, or any other means, or incorporated into any information retrieval System, electronic or mechanical, without the written permission of the Author and the publisher.
3. I/We further declare that no part of this work has been fully or partially published to anywhere and the said work will not publish anywhere by me/us in future except new edition of this book.
4. My/Our paper is not a racial or provocative incitement. If there is a complaint in the future regarding this paper, then its full responsibility will be ours.
5. No responsibility is assumed by RET International Academic Publishing & Rudra Education Trust, the Publisher, Acquisition Editor & Editor-in-Chief of RIAP/RET, its staff or members or the editorial board for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products instruction, advertisements or ideas contained in a publication by RIAP/RET and by the Publisher of RIAP/RET.
6. Your publication is being done in accordance with the current applicable rules and regulations of the Government and UGC or any other organization and also according to the rules of the merit base for the Appointment of any Govt. or Non-Govt. service. If such an organization or affiliate organization will change the former rules or regulations of their previously approved Merit norms after the publication of your paper or book, such change or any other claim will not be valid for your published paper or book. Not also, you will not be able to claim for get back a paid publication fees for the publication. In such circumstances, no claim will be valid even for re-publication.
7. Not any change or re publishing this current work in future.